Kenmore 9890 Replacement Refrigerator Water Filter

Fresh-tasting water and clear ice start with a clean filter. The Kenmore 9890 refrigerator water filter is a direct replacement designed for select Kenmore side-by-side refrigerators, reducing chlorine taste and odor along with common sediment so your family gets better-tasting water and ice every day.

Also listed under 46-9890, 469890, and Kenmore 46 9890 — these all refer to the same filter family.

Product Overview

The Kenmore 9890 water filter uses carbon block filtration to target chlorine taste and odor, along with sediment and particulate matter, without slowing down your dispenser's flow. It's built for a secure twist-and-lock fit, so there's no tool kit required and no guesswork during installation.

 

Compatibility

Before ordering, confirm the number printed on your current filter or filter housing matches one of the numbers below.

Direct equivalents:

This filter fits select Kenmore side-by-side refrigerators. Fit varies by model, so always check your current filter or refrigerator owner's manual number before ordering — not just the refrigerator brand or style.

Not sure which filter you need? Browse the full Kenmore Refrigerator Water Filters collection to compare models, or see our Kenmore Refrigerator Water Filter Replacement Guide for help identifying your exact filter.

Product Specifications

Key Features and Benefits

• NSF 42 certified for chlorine taste and odor reduction

• Carbon block filtration targets sediment and common impurities without restricting flow

• Tool-free installation — twist-and-lock design fits in minutes

• 200-gallon capacity for roughly 6 months of typical household use

• Consistent performance throughout the filter's full lifespan, not just when new

What Does This Filter Reduce?

Tested to NSF/ANSI Standard 42, the Kenmore 9890 filter is designed to reduce:

• Chlorine taste and odor

• Sediment and particulates

• Common aesthetic impurities affecting taste and clarity

Like most standard refrigerator carbon filters, it is not designed to remove fluoride or serve as a substitute for a whole-home filtration or reverse osmosis system. If you're filtering for specific contaminants beyond taste and odor, check your local water report first.

How to Install the Filter

1. Locate the filter housing inside your refrigerator (usually top-right interior or base grille).

2. Turn the old filter counterclockwise about a quarter turn until it releases.

3. Pull the old filter straight out and discard it.

4. Remove the protective cap from the new Kenmore 9890 filter.

5. Align the new filter with the housing and insert it.

6. Turn clockwise until it locks securely into place.

7. Run water through the dispenser for 2–3 minutes to flush carbon fines.

8. If your model has a filter-change indicator, press and hold the reset button for a few seconds.

When Should You Replace the Filter?

Replace the Kenmore 9890 filter every 6 months or 200 gallons, whichever comes first. Consider replacing sooner if you notice:

• Water or ice tasting off or flat

• Slower flow from the dispenser

• The filter-change indicator light turning on

• Cloudy water or unusual odor from the ice maker

What's Included?

Each order includes the Kenmore 9890 replacement filter cartridge, ready to install — no additional tools, adapters, or accessories are needed. Choose 1-pack, 2-pack, or 3-pack options depending on how far ahead you want to stock up.

Frequently Asked Questions

Is the Kenmore 9890 the same as the 46-9890?
Yes. 9890, 46-9890, and 469890 all refer to the same replacement filter family — just written differently across listings and manuals.

Is this a genuine Kenmore OEM filter?
 Yes, It's a genuine product.

Does this filter fit all Kenmore refrigerators?
No. It fits select Kenmore side-by-side models using the LT500P-style housing. Always confirm your current filter's part number before ordering.

How long does the Kenmore 9890 filter last?
Up to 6 months or 200 gallons, whichever comes first, under typical household use.

Does this filter remove fluoride?
No. Like most standard refrigerator carbon filters, it targets chlorine taste/odor and sediment, but does not remove fluoride.

Do I need to flush the filter after installing it?
Yes. Run water through the dispenser for a few minutes after installation to clear loose carbon particles before regular use.

What if my old filter's part number isn't listed?
Double-check against your refrigerator's owner manual or contact us — filter housings can look similar across models but aren't always interchangeable.

Our Policies:

Privacy Policy

Terms of Service

Shipping Policy

Return & Refund Policy

Billing Terms & Conditions