Sub Zero 4204490 Refrigerator Water Filter

The Sub-Zero 4204490 refrigerator water filter is a replacement cartridge built for compatible Sub-Zero built-in, PRO48, and integrated refrigerator models. It filters water supplied to your dispenser and ice maker, reducing chlorine taste and odor along with sediment and other common tap water impurities, and it is tested to NSF/ANSI 42 and 53 standards.

If you already know your refrigerator uses part number 4204490, you can order with confidence below. If you are not sure yet, the compatibility section right after this covers exactly what to check first.

Product Overview

This 4204490 water filter uses a carbon and fiberglass filtration media to treat water before it reaches your glass or ice tray. It is designed as a direct twist-in replacement, so no tools or plumbing changes are needed. A properly seated cartridge protects your refrigerator's internal water components from sediment buildup, which helps the appliance run efficiently between filter changes.

Compatibility: Is the 4204490 Right for Your Sub-Zero?

The 4204490 is designed for Sub-Zero built-in, PRO48, and integrated refrigerator models, including units such as the 648PRO/G and BI-Series lineup. It is also sold under a few related reference numbers, including 4204496, 4290510, and 7012975, since Sub-Zero has used more than one part number for the same or a closely related filter design over time.

One detail worth checking closely: on some BI-Series refrigerators, the correct filter can depend on your unit's serial number rather than the model number alone. If your current filter shows part number 7005017, 7009931, or 4204490, this replacement should be correct. If your existing filter shows a different number, or if your refrigerator was manufactured before serial number 4116297, check your owner's manual or contact our support team before ordering to confirm the right part.

If you are still unsure, Frost Water Filter's Sub-Zero refrigerator water filter collection lists every model we carry, and our team is happy to confirm compatibility by email before you buy.

Product Specifications

Key Features and Benefits

• Reduces chlorine taste and odor, along with sediment and rust particles common in household tap water

• Tested and certified to NSF/ANSI 42 and 53 standards

• Twist-in design installs in minutes with no tools required

• Rated for 750 gallons or roughly six months of typical household use

• Supports consistent water flow and helps protect your refrigerator's internal water system from buildup

What Does This Filter Reduce?

Filters tested to NSF/ANSI standard 42 address taste, odor, and chlorine, while standard 53 covers a wider set of health-related contaminants. Filters that meet this dual certification are commonly tested for reduction of substances such as:

• Chlorine taste and odor

• Sediment and turbidity

• Lead

• Mercury

• Certain pesticides and industrial contaminants such as 2,4-D and carbofuran

• Asbestos and benzene

Exact contaminant reduction can vary by test batch and certification listing, so if a specific contaminant matters for your household, it is worth checking the current NSF certification listing for this filter model before you rely on it for that particular concern.

How to Install the Sub-Zero 4204490

Installation is a simple twist-in process that most people complete in under five minutes without tools.

1. Locate your filter housing. Depending on your model, this is either inside the fresh food compartment or behind the base grille.

2. Remove the old filter by twisting it counterclockwise and pulling it out. Keep a towel nearby for minor drips.

3. Remove the protective cap from the new 4204490 filter and check it for any visible damage.

4. Insert the new filter into the housing and twist clockwise until it locks fully into place.

5. Run water through the dispenser for a few minutes to flush trapped air and loose carbon particles. Discard this first batch of water rather than drinking it.

6. Reset your refrigerator's filter indicator light if your model has one.

For a complete walkthrough with troubleshooting tips for stuck filters or slow water flow, see our full Sub-Zero 4204490 installation guide.

When Should You Replace the Filter?

Sub-Zero recommends replacing this filter roughly every six months, or after filtering approximately 750 gallons, whichever comes first. Households with heavier water use or harder tap water may need to replace it slightly sooner. Watch for a few practical warning signs between scheduled changes:

• Noticeably slower water flow from the dispenser

• A change in taste or odor

• Cloudy ice or water

• A filter indicator alert on your control panel

Our Sub-Zero refrigerator maintenance checklist walks through a simple monthly routine to catch these signs early.

OEM or Compatible Replacement?

To avoid any confusion, here is a straightforward answer: this listing is a replacement water filter cartridge manufactured to match Sub-Zero's original specifications and part number 4204490. It is not a universal or generic filter, and it is built for the specific compatibility range described above. Before ordering, confirm your refrigerator's exact model number and, for BI-Series units, your serial number range, since Sub-Zero has used more than one filter part number across different production periods.

What's Included

Each order includes one Sub-Zero 4204490 replacement water filter cartridge, ready to install with no additional tools or adapters needed. Multi-pack options are available above if you would like to stock up for future replacements.

Every order ships free within the USA. If you're also researching other Sub-Zero refrigerator parts or filters, browse our full refrigerator water filter collection or check our Sub-Zero 7042798 cartridge replacement guide if your fridge uses a different filter model.

Frequently Asked Questions

What refrigerator models does the Sub-Zero 4204490 fit?

It fits Sub-Zero built-in, PRO48, and integrated refrigerator models, including 648PRO/G and BI-Series units. On some BI-Series refrigerators, the correct filter depends on your unit's serial number, so check your existing filter's part number or your owner's manual if you are unsure.

Is the Sub-Zero 4204490 OEM or a compatible replacement?

This filter is manufactured to match Sub-Zero's original specifications and part number. It is a direct replacement cartridge rather than a universal or generic filter.

How do I install the Sub-Zero 4204490 water filter?

Twist out the old cartridge, remove the packaging from the new filter, insert and twist it clockwise until it locks into place, then flush the system for a few minutes before use. Full steps are listed above.

How often should I replace this filter?

Roughly every six months or after 750 gallons of use, whichever comes first. Replace it sooner if you notice slower flow, a taste change, or a filter indicator alert.

What does the Sub-Zero 4204490 filter remove?

It is certified to NSF/ANSI 42 and 53, which covers chlorine taste and odor along with a range of contaminants including sediment, lead, and certain pesticides. See the full list above.

Will this filter fit every Sub-Zero refrigerator?

No. It is designed for specific compatible models. Always confirm your model and, where relevant, your serial number before ordering.

Does the filter need to be flushed after installation?

Yes. Running water through the dispenser for a few minutes after installation clears trapped air and loose carbon particles from the new cartridge.

What is included when I order?

One Sub-Zero 4204490 replacement filter cartridge per unit ordered, based on the pack size you select.

If You Want To Know About Our All Policy Please Visit These LInk: 

Privacy Policy 

Terms of Service 

Shipping Policy 

Return & Refund Policy 

Billing Terms & Conditions